remove extra header that apparently is done for me

_posts/2021-03-27-sd-card-backer-upper.md

@@ -2,7 +2,6 @@
 layout: post
 title: "Automatic SD Card Backer Upper"
 ---
-# Automatic SD Card Backer Upper
 
 I play on my DSi a lot, and i have all of my cartridges dumped to an SD card
 so I don't need to carry them with me to switch games. All my saves are stored
@@ -11,7 +10,7 @@ lost. So I used my Raspberry Pi to easily back it up. All I have to do is plug
 the card into the Pi, and it copies the files into a new folder and toggles a
 light when its done.
 
-## What I used:
+# What I used:
  * SD Card adapter
  * USB mouse that I didn't care about
  (any usb device that can light up will work)
@@ -20,12 +19,12 @@ light when its done.
   
 I did this on Ubuntu, but the instructions should work for Raspbian as well.
 
-## Files
+# Files
 
 I made a few files for this to work: a udev rule file, a systemd unit, and a
 shell script.
 
-### Udev Rule
+## Udev Rule
 ```
 # /etc/udev/rules.d/999-automount.rules 
 ACTION=="add", SUBSYSTEM=="block", ENV{ID_SERIAL_SHORT}=="000000000828", RUN+="/usr/bin/systemctl start DSi.service"
@@ -34,7 +33,7 @@ You'll have to modify the `000000000828` to match the serial of your device,
 which you can get by plugging in the device, finding its /dev file, and running
 `udevadm info /dev/sdx | grep ID_SERIAL_SHORT`.
 
-### Systemd Service
+## Systemd Service
 ```
 # /etc/systemd/system/DSi.service
 [Unit]
@@ -48,7 +47,7 @@ with `systemctl enable`, just executed with `systemctl start`, which the udev
 rule will do automatically. You'll want to modify the `ExecStart` line to point
 to your shell script.
 
-### Shell Script
+## Shell Script
 ```
 #!/bin/sh
 # /home/ubuntu/autocopy.sh
@@ -85,7 +84,7 @@ The `USBDEV` variable is the path to your USB "light" inside
 then `cat` the `idProduct` and `idVendor` files inside each usb device folder
 until you find the one that matches your usb device.
 
-## Final Product
+# Final Product
 
 What you'll have is something you can plug your SD card into and have a backup
 taken automagically. The light turns on when it's copying files, and turns off